Published Articles
VelocityEHS is a trusted source of information on a range of EHS and sustainability topics. We work with publications in an array of industries to bring insight and best practices to the news, trends and subjects that matter most to EHS professionals. As always, our goal is to help you reach your EHS goals faster.
Industrial Hygiene in the Workplace – May 2021
Breathing Safely: Simplifying Complex Respirator Fit Test Requirements & How Technology Can Help
w/ Dave Risi, CIH, CSP, Director of Industrial Hygiene Solutions at VelocityEHS
OH&S – May 2021
The Foundation of a Great Industrial Hygiene Program
w/ Dave Risi, CIH, CSP, Director of Industrial Hygiene Solutions at VelocityEHS
ISHN – April 2021
Let's Move Away From One-Sided Online Safety Training
w/ Susan Amore, Senior Product Manager, Training & Learning at VelocityEHS
EHS Today – March 2021
I’m Not Sure I’m Doing This Right—Home Office Ergonomics
w/ Rick Barker, CPE, CSP and Principal Solutions Strategist at VelocityEHS
EHS Today – March 2021
Understanding the Total Cost of an Injury
w/ Rick Barker, CPE, CSP and Principal Solutions Strategist at VelocityEHS
Risk & Insurance – February 2021
Looking to Build and Grow Your Ergonomics Program? Don’t Miss This National Ergo Conference Session
w/ Jeff Sanford, CPE and Director of Ergonomics Consulting at VelocityEHS
VPPPA The Leader Magazine – Fall 2020
The Top 5 Myths & Truths of Ergonomics
w/ Ryan Cowart, CPE, Managing Consultant at VelocityEHS
ISHN – September 2020
Software Helps Connect as the Pandemic Changes Workplaces
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
OH&S – September 2020
Breaking Down the Silos to Simplify Industrial Hygiene During COVID-19 and Beyond
w/ Dave Risi, CIH, CSP, Director of Industrial Hygiene Solutions at VelocityEHS
Safety + Health – August 2020
John Damgaard
OH&S – August 2020
13 Tips for Manufacturing Employees Restarting Work
w/ Blake McGowan, CPE, Ergonomics Engineer and Managing Consultant at VelocityEHS and Bianca Sfalcin, AEP, Ergonomics Engineer at VelocityEHS
OH&S – August 2020
Why Effective Chemical Safety Training Is More Important Than Ever
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
EHS Today – August 2020
Exoskeletons: The Good, the Bad and the Ugly
w/ Blake McGowan, CPE, Ergonomics Engineer and Managing Consultant at VelocityEHS
Risk & Insurance – July 2020
50 Years of Misinformation — Squat Lifting Is Not Safer Than Stoop Lifting
w/ Blake McGowan, CPE, Ergonomics Engineer and Managing Consultant at VelocityEHS
OH&S – June 2020
Leveraging Technology to Drive Workplace Ergonomics
w/ Josiah Allen, CPE, Senior Consultant at VelocityEHS
Risk & Insurance – June 2020
Opioid-Related Overdose Deaths Are Still Devastating Communities; Here’s How Ergonomics Can Help
w/ Blake McGowan, CPE, Ergonomics Engineer and Managing Consultant at VelocityEHS
OH&S – May 2020
Upping Your Industrial Hygiene and Chemical Management Game
w/ Dave Risi, CIH, CSP, Director of Industrial Hygiene Solutions at VelocityEHS
Risk & Insurance – May 2020
Teaching Post-Pandemic Resilience: 14 Ergonomic Tips to Bring Workers Back Safely
w/ Blake McGowan, CPE, Ergonomics Engineer and Managing Consultant at VelocityEHS and Bianca Sfalcin, AEP, Ergonomics Engineer at VelocityEHS
ISHN – April 2020
Don’t Get Bogged Down in Complex EHS Software
w/ Glenn Trout, Founder & Strategic Advisor at VelocityEHS
ISHN – March 2020
Workers Play a Greater Role in Managing Risks
w/ Bill Murphy, EHS & Sustainability Expert and Senior Director of Business Development at VelocityEHS
ISHN – February 2020
Centralized Data Collection Elevates Risk Prevention
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
ISHN – December 2019
HazCom for Multi-Employer Sites
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
EHS Today – November 2019
Using Blended Learning and Roles/Responsibilities to Initiate Action
w/ Jeff Sanford, CPE, Director of Consulting at VelocityEHS
EHS Today – October 2019
Six Ways EHS Software Can Help You Strengthen Industrial Hygiene
w/ Dave Risi, CIH, CSP, Director of Industrial Hygiene Solutions at VelocityEHS
EHS Today – October 2019
The Devastating Consequences of Ignoring Workplace Ergonomics
w/ Blake McGowan, CPE, Ergonomics Engineer and Managing Consultant at VelocityEHS
OH&S – October 2019
Putting Chemical Safety Training to the Test
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
OH&S – September 2019
Working Towards ISO 45001 Certification and Beyond
w/ Glenn Trout, Founder & Strategic Advisor at VelocityEHS
OH&S – September 2019
Implementing an Enterprise-Wide Ergonomics Process
w/ Rick Barker, Senior Consultant and Ergonomics Engineer at VelocityEHSachel Zoky, Associate Consultant and Ergonomics Engineer at VelocityEHS
ISHN – September 2019
Managing Process Changes: Visibility, Collaboration and Workflow Control Are All Key
w/ Matt Airhart, President & COO of VelocityEHS
ISHN – August 2019
7 Key Features of Today's Cutting-Edge Chemical Management Software
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
OH&S – July/August 2019
Getting It Right: Creating and Deploying an Effective and Compliant Chemical Safety Training Program
w/ Melissa McCaffrey, EHS & Sustainability Expert and Director at VelocityEHS
Facility Executive – June 2019
Factoring In Ergonomic Furniture
w/ Gene Kay, CPE, Director at VelocityEHS
OH&S – May 2019
Chemical Management: Five Ways to Meet the Challenges of IH in a Changing Industry
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
ISHN – May 2019
A New Dashboard For EHS Metrics: Use These Five Strategies To Get The Most From Your Key Performance Indicators
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS
Safety + Health – March 2019
HazCom: Chemicals from Foreign Suppliers
w/ Kirk Nelson, Systems Administrator of MSDSonline Authoring Services & Nick Stone, MSDSonline Regulatory Specialist
EHS Today – March 2019
Emerging Technologies in Ergonomics: Will You Be Ready?
w/ Deepesh Desai, CPE, Director of Consulting and Ergonomics at VelocityEHS
Modern Materials Handling – February 2019
Manufacturer Reduces Workplace Injuries with Ergonomics System
Environmental Leader – November 2018
OSHA HazCom Standard Changes Are Coming - Are You Ready?
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
The Synergist – November 2018
The Case for Ergonomics
w/ Blake McGowan, CPE, Ergonomics Engineer and Managing Consultant at VelocityEHS
ISHN – October 2018
6 Steps to Ensure an Effective HazCom Program
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS
ISHN – September 2018
As OSHA's HazCom Standard Evolves
w/ Glenn Trout, Founder & Strategic Advisor at VelocityEHS
Chem.Info – August 2018
Managing Change to Drive Chemical Process Safety Management
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS
Safety + Health – July 2018
Preparing for the HazCom Update
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
ISHN – May 2018
How to Best Leverage Innovative Technology
w/ Bill Murphy, EHS & Sustainability Expert and Senior Director of Business Development at VelocityEHS
OH&S – May 2018
Tips for Creating a More Successful Industrial Hygiene Program
w/Zoë Frances, EHS & Sustainability Expert and Product Marketing Director at VelocityEHS
Chem.Info – May 2018
Creating & Maintaining An Effective Chemical Hygiene Plan For Better Safety Regulation Compliance
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
Manufacturing Business Technology – April 2018
A Fresh Look At SaaS EHS Software
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
ISHN – April 2018
High-Risk Ops Require Knowledge & Skills
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS
Pollution Equipment News – February/March 2018
Streamlining Compliance with EPA’s Leak Detection and Repair (LDAR) Requirements
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS
ISHN – January 2018
Short, More Digestible Training Programs Meet Today's Needs
w/ Brad Harbaugh, EHS & Sustainability Expert and Director at VelocityEHS
National Driller – October 2017
Tips for Job Safety Analysis on Drilling Jobs
w/ Bill Murphy, EHS & Sustainability Expert and Senior Director of Business Development at VelocityEHS
IMPO – October 2017
Factory Safety: Understanding Job Hazards Through More Thorough Task Analysis
w/ Bill Murphy, EHS & Sustainability Expert and Senior Director of Business Development at VelocityEHS
Chemical Engineering – October 2017
Focus on Mobile Apps: Remote-Access Tool Helps Users Manage Chemical Safety
Construction Business Owner – September 2017
Are you Ready for OSHA's First ITA Submission Deadline?
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
EHS Today – September 2017
Texas Strong: Safety Steps Up to Help Hurricane Harvey Victims
Lab Manager – September 2017
21st Century Safety Solutions
w/ Matt Airhart, President & COO of VelocityEHS
EHS Today – September 2017
Risk Management: Six Steps to Completing an Effective Job Safety Analysis
w/ Glenn Trout, Founder & Strategic Advisor at VelocityEHS
Industrial Maintenance & Plant Operation – August 2017
Seven Tips for Managing Plant Disasters
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
Facility Safety Management – August 2017
Safety Training Under Complex Conditions
Construction Business Owner – June 2017
4 Basic Steps to Conducting a Job Safety Analysis
w/ Bill Murphy, EHS & Sustainability Expert and Senior Director of Business Development at VelocityEHS
Construction Business Owner – May 2017
Changing the Jobsite Safety Game
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS
OH&S – May 2017
Understanding Chemical Safety Following the Final GHS Deadline
w/ Glenn Trout, Founder & Strategic Advisor at VelocityEHS
Industrial Hygiene News – April 2017
Reducing Fatalities in the Oil & Gas Industry Through Targeted Hazard Elimination Strategies
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS
Safety+Health – February 2017
App for Recording and Reporting Workplace Incidents
EHS Today – February 2017
Leveraging Technology to Ease Regulatory Challenges Facing Construction
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
Canadian Occupational Safety – November 2016
Tools of the Trade: Meeting Management
Construction Executive Risk Management eNewsletter – November 2016
How TSCA Reform Will Shake Up Construction
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
Safety.BLR.com – October 2016
Hazard Communication: SDS and Secondary Label Compliance Following the GHS Deadline
w/ Melissa McCaffrey, Director at VelocityEHS
OH&S – October 2016
Creating an Effective Ergonomics Program
w/ Gene Kay, CPE, (former) Director at VelocityEHS
Industrial Hygiene News – September/October 2016
Ergonomics ROI: Finding a Solution that Fits Your Workforce
w/ Gene Kay, CPE, (former) Director at VelocityEHS
Oil & Gas Financial Journal – September 2016
EHS Management Software: In A Challenging Oil And Gas Market, Additional Investment Can Help Ease The Pressure
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS
Facility Safety Management – September 2016
Making HAZMAT Less Scary
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS
Chemical Engineering – September 2016
Mobile Apps for Increasing Process Efficiency
w/ John Colón, Product Manager at VelocityEHS
Construction Business Owner – August 2016
TSCA 'Hit List' Targets Many Construction Chemicals
w/ Melissa McCaffrey, Director at VelocityEHS
Canadian Mining Journal – August 2016
The Threat Hiding In Broad Daylight: Protecting Workers Against the Sun's UV Rays Helps Avert Skin Disease and Absenteeism
w/ Matt Airhart, President & COO of VelocityEHS
EHS Today – July 2016
Hazard Communication Management in the Post-GHS Deadline Workplace
w/ Glenn Trout, Founder & Strategic Advisor at VelocityEHS
OH&S – July 2016
GHS Training: Passing Deadlines Don't Mean the Work is Over
w/ Glenn Trout, Founder & Strategic Advisor at VelocityEHS
ISHN – June 2016
Cookie-Cutter Training Doesn't Cut It
Facility Executive – May 2016
Office Ergonomics: Finding The Right Fit
w/ Gene Kay, CPE, (former) Director at VelocityEHS
ISHN – May 2016
Product Innovations: Safety Data Mobile App by VelocityEHS
OH&S – May 2016
Ergonomics Software
Roofing Contractor – May 2016
Making Hazard Communication a Priority
w/ Melissa McCaffrey, Director at VelocityEHS
Workplaces Magazine – April 2016
Ergonomics By VelocityEHS
Manufacturing Business Technology – April 2016
The Real Value Of EHS Software
w/ Matt Airhart, President & COO of VelocityEHS
Pharmaceutical Processing – April 2016
How Technology & Plant Connectivity Helps Mitigate Workplace Risk
Disaster Recovery Journal – April 2016
Lessons from Tianjin
Facility Safety Management – March 2016
Improving Technology: Communicating Chemical Hazards to First Responders
Construction Business Owner – March 2016
Use Technology to Face EHS Challenges
w/ Matt Airhart, President & COO of VelocityEHS
OH&S – March 2016
Controlling the Situation: Actionable Steps to Help Mitigate Hazmat Incidents
w/ Glenn Trout, Founder & Strategic Advisor at VelocityEHS
NAEM's The Green Tie Blog – February 2016
Prepare to Engage When Introducing New EHS&S Software
w/ Selin Jessani, (former) Director of Customer Experience at VelocityEHS
Capterra Construction Management Blog – February 2016
The Ultimate Review of Construction Project Management Methodologies
Industrial Hygiene News – February 2016
Advancements in Chemical Technology: Making Workplaces Safer for All
w/ Glenn Trout, Founder & Strategic Advisor at VelocityEHS
Crain's Chicago Business – December 2015
Software firm taking block of Motorola Mobility's space in the Mart
Security Products – December 2015
Perfect Foresight: Making Hazardous Chemical Safety Procedures a Priority
